Retrofit Electrical Wiring Harness For CA Module Card Reader - AZ82.60-P-0032-01GW
Model 463 (except 463.202)
as of model year 2017
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A |
- Connect the blue 1-pin plug (5.1) to the tuner unit (A90/4).
- Lay the wiring harness (5) along the existing wires to the installation location of the card reader of the CA module.
Pay attention to the extended length of the wiring harness (5) for connecting with the card reader CA module.
The blue 1-pin plug (5.2) will be connected to the card reader CA module at a later stage.