Rear Axle Shaft - BF35.30-P-1000-01G

Model 118, 156, 166, 170, 171, 172, 176, 177, 190, 204, 205, 206, 207, 208, 209, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 223, 230, 231, 238, 242, 246, 247, 253, 257, 290, 292

Plugged in shafts

REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number	Designation			Model 118 Plugged in shafts	Model 156 Plugged in shafts
BF35.30-P-1001-01G	Filling capacity for joint housing	Ø82	g	80	80
		Ø95	g	100	100
		Ø102	g	120	120
		Ø106	g	130	130
		Ø112	g	140	140
		Ø116	g	150	150

REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number	Designation			Model 166, 170, 171, 172, 190, 204, 207, 208, 209, 211, 212, 215, 216, 218, 219, 220, 221, 230, 246, 292 Plugged in shafts	Model 176 Plugged in shafts
BF35.30-P-1001-01G	Filling capacity for joint housing	Ø82	g	80	80
		Ø95	g	100	100
		Ø102	g	120	120
		Ø106	g	130	130
		Ø112	g	140	140
		Ø116	g	150	150

REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number	Designation			Model 177 Plugged in shafts	Model 205, 206 Plugged in shafts
BF35.30-P-1001-01G	Filling capacity for joint housing	Ø82	g	80	80
		Ø95	g	100	100
		Ø102	g	120	120
		Ø106	g	130	130
		Ø112	g	140	140
		Ø116	g	150	150

REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number	Designation			Model 213 Plugged in shafts	Model 217 Plugged in shafts
BF35.30-P-1001-01G	Filling capacity for joint housing	Ø82	g	80	80
		Ø95	g	100	100
		Ø102	g	120	120
		Ø106	g	130	130
		Ø112	g	140	140
		Ø116	g	150	150

REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number	Designation			Model 222 Plugged in shafts	Model 223 Plugged in shafts
BF35.30-P-1001-01G	Filling capacity for joint housing	Ø82	g	80	80
		Ø95	g	100	100
		Ø102	g	120	120
		Ø106	g	130	130
		Ø112	g	140	140
		Ø116	g	150	150

REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number	Designation			Model 231 Plugged in shafts	Model 238 Plugged in shafts
BF35.30-P-1001-01G	Filling capacity for joint housing	Ø82	g	80	80
		Ø95	g	100	100
		Ø102	g	120	120
		Ø106	g	130	130
		Ø112	g	140	140
		Ø116	g	150	150

REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number	Designation			Model 242 Plugged in shafts	Model 247 Plugged in shafts
BF35.30-P-1001-01G	Filling capacity for joint housing	Ø82	g	80	80
		Ø95	g	100	100
		Ø102	g	120	120
		Ø106	g	130	130
		Ø112	g	140	140
		Ø116	g	150	150

REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number	Designation			Model 253 Plugged in shafts	Model 257 plugged-in shafts
BF35.30-P-1001-01G	Filling capacity for joint housing	Ø82	g	80	80
		Ø95	g	100	100
		Ø102	g	120	120
		Ø106	g	130	130
		Ø112	g	140	140
		Ø116	g	150	150

REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number	Designation			Model 290 Plugged in shafts
BF35.30-P-1001-01G	Filling capacity for joint housing	Ø82	g	80
		Ø95	g	100
		Ø102	g	120
		Ø106	g	130
		Ø112	g	140
		Ø116	g	150