Remove/Install Steering Wheel - AR46.10-P-0100LW

Model 205 

Model 213 

Model 238 

Model 253, 293 

Fig 1: Steering Wheel Components Location - Model 213 (Shown On Model 205)

Courtesy of MERCEDES-BENZ USA

Shown on model 205 

	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Turn steering wheel (1) to center position.	The front wheels must be in the straight-ahead position.
2	Remove airbag unit from steering wheel (1).		AR91.60-P-0660LW
3	Counterhold steering wheel (1) and remove bolt (2).	Installaton: Reuse screw (2) and mark with a non-water-soluble pen (color dot).
		Screw/bolt, steering wheel to steering shaft If the bolt (2) already bears a marking (color dot) ↓ replace the bolt (2).	*BA46.10-P-1001-02J
4	Release and disconnect electrical connection (3).
5	Remove steering wheel (1).	Model 205.### 1# Model 213.### 1# Model 238.### 1# Model 253.### 1#, 293.### 1# Installation: Align recesses of the splines (arrows A) in steering wheel (1) with the markings (a) on the steering shaft. Model 205.### 2# Model 213.### 2# Model 238.### 2# Model 253.### 2#, 293.### 2# Installation: Align recesses of the splines (arrows A) in steering wheel (1) with the markings (b) on the steering shaft.
6	Install in the reverse order.