Drain/Pour In Coolant - AR20.00-P-1142MRH
Engine 264 Model 213, 238
MODIFICATION NOTES
| 12.02.2020 | Method changed. | ||
| 25.04.2021 | Cooling system | BF20.00-P-1001-06D |
| Risk of injury on skin and eyes by scalding with splashing out of the hot coolant. Risk of poisoning from swallowing coolant | Open the cooling system only when the coolant temperature is below 90 ° C. Slowly open the lid and release the excess pressure. Do not pour coolant into drinking containers. Wear protective gloves, protective clothing and protective goggles. |
AS20.00-Z-0001-01A | |
| Notes on avoiding damage through contamination and foreign objects | AH00.00-P-5000-01A | ||
| Notes on coolant | AH20.00-N-2080-01A | ||
| Notes on coolant level | AH20.00-P-1142-01CW | ||
| Drain | |||
| 1 | Slowly remove the cap from the engine cooling system expansion tank. | ||
| 2 | Remove the lower engine compartment panels. | AR61.20-P-1105LWE | |
| 3 | Slide a drain hose onto the fitting (1). | ||
| 4 | Open the drain valve (2), drain the coolant and collect it in a suitable container. | ||
| 5 | Close the drain valve (2) and pull the drain hose off the fitting (1). | ||
| 6 | Remove the coolant hose (3) from the oil cooler (4) and collect the escaping coolant in a suitable container. | AR20.20-P-7441-01RQ | |
| 7 | Attach the coolant hose (3) to the oil cooler (4). | AR20.20-P-7441-01RQ | |
| Pour in | |||
| 8 | Add the coolant and bleed the engine cooling system. | AR20.00-P-1142-04OLC | |
| Test pressure for pressure-testing the engine cooling system | *BE20.30-P-1005-01A | ||
Engine 264 in Model 238.385/386/485 Cooling system |
*BF20.00-P-1001-06D | ||
| Fig 2 | |||
| Fig 5 | |||
| Fig 1 | |||
| Fig 4 | |||
| Fig 3 | |||
| 9 | Check engine cooling system for leaks. | AR20.00-P-1011OLC | |
| 10 | Install the lower engine compartment panels. | AR61.20-P-1105LWE |
RADIATOR OR EXPANSION RESERVOIR CAP
| Number | Designation | 2-stage latch cover | ||
|---|---|---|---|---|
| BE20.30-P-1005-01A | Test pressure for pressure-testing the engine cooling system | Overpressure | bar | 1, 4 |
COOLING SYSTEM
| Number | Designation | Engine 264 in Model 213 | Engine 264 in Model 238.377/378/380/383/387/477/478/480/483/487 | |||
|---|---|---|---|---|---|---|
| BF20.00-P-1001-06D | Cooling system | Workshop replacement amount | Main circuit | Liter | ≈ 11, 0 | ≈ 9, 0 |
| Low-temperature circuit | Liter | - | - | |||
| Antifreeze / water | Down to -37 °C | % | 50/50 | 50/50 | ||
| -38 °C and below | % | 55/45 | 55/45 | |||
| Specifications for Operating Fluids | BB00.40-P-0310-01A | BB00.40-P-0310-01A | ||||
| Specifications for Operating Fluids | BB00.40-P-0325-06A | BB00.40-P-0325-06A | ||||
| Specifications for Operating Fluids | BB00.40-P-0326-06A | BB00.40-P-0326-06A | ||||
COOLING SYSTEM
| Number | Designation | Engine 264 in Model 238.385/386/485 | |||
|---|---|---|---|---|---|
| BF20.00-P-1001-06D | Cooling system | Workshop replacement amount | Main circuit | Liter | ≈ 10, 0 |
| Low-temperature circuit | Liter | - | |||
| Antifreeze / water | Down to -37°C | % | 50/50 | ||
| 38 °C and below | % | 55/45 | |||
| Specifications for Operating Fluids | BB00.40-P-0310-01A | ||||
| Specifications for Operating Fluids | BB00.40-P-0325-06A | ||||
| Specifications for Operating Fluids | BB00.40-P-0326-06A | ||||