Remove/Install Fuse And Relay Module In Rear - AR54.15-P-0001LWE

Model 213 

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1.1	Remove right side cover in trunk.	Model 213.0/1	AR68.30-P-4800LWE
1.2	Remove right side trim in trunk.	Model 213.2	AR68.30-P-1185LWE
2	Disconnect ground line from battery.		AR54.10-P-0003LW
3	Remove screw (2) and remove fuse box (1) from equipment carrier.	The brackets for the fuse box (1) must be seated into the guides on the equipment carrier (arrows A).
4	Remove electrical wiring harness from fuse box (1).	Replace cable ties.
5	Remove screw/bolts (3).
6	Remove fuse box (1) from rear fuse and relay module (K40/5).
7	Remove positive line (4) from rear fuse and relay module (K40/5).	Nut, positive line to rear fuse and relay module	*BA54.15-P-1001-01K
8	Disconnect all electrical connectors from rear passenger compartment fuse and relay module (K40/5).
9	Unclip all fuse holders and place to one side.
10	Remove rear fuse and relay module (K40/5).
11	Change fuses and relays.	When replacing the rear fuse and relay module (K40/5).
	Assignment of rear fuse and relay module	Model 213 up to model year 2021	GF54.15-P-1256-30FG
12	Install in the reverse order

FUSE AND RELAY BOX

Number	Designation			Model 213
BA54.15-P-1001-01K	Nut, positive line to rear fuse and relay module	M6	Nm	8
		M8	Nm	16