Tightening procedures for charge air manifold - AR09.41-P-1312-01MT
Engine 133 in model 117, 156, 176
Engine 260 in model 118, 177, 247
Engine 270 in model 117, 156, 176, 242, 246.2
INTAKE MANIFOLD
| Number | Designation | ENGINE 260 | ENGINE 270 | |
|---|---|---|---|---|
| BA09.20-P-1001-01U | Screw/bolt, charge air distributor to cylinder head | Nm | 14 | 14 |
CHARGE AIR PIPE/CHARGE AIR COOLING
| Number | Designation | ENGINE 133 | |
|---|---|---|---|
| BA09.41-P-1001-01T | Bolt, charge air distributor to cylinder head | Nm | 9 |
Engine 270
- Tighten the bolts (1 of 5) for the charge air distributor in numerical order. Engine 270 In model 117, 156, 176, 242, 246.2
.
Engine 260
- Tighten the bolts (1 of 5) for the charge air distributor in numerical order. Engine 260 in model 177
Engine 133