Remove/Install Sensors For Blind Spot Assist - AR54.71-P-0100LW
Model 205
up to model year 2019
with code 234 (Blind Spot Monitoring)
Model 205
up to model year 2019
with code 237 (Active Blind Spot Assist)
Shown on model 205.0
Fig 1: Sensors For Blind Spot Assist Components Location - Model 205 Up To Model Year 2019 With Code(s) 234 And 237
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on preventing damage to electronic components due to a magnetic tool | AH54.00-P-0002-01A | ||
| Remove/install | |||
| 1 | Remove rear bumper (1). | Model 205.2 up to model year 2019 with code 234 (Blind Spot Monitoring) Model 205.2 up to model year 2019 with code 237 (Active Blind Spot Assist) |
AR88.20-P-2200LWS |
| Model 205.0/1/3/4 up to model year 2019 with code 234 (Blind Spot Monitoring) Model 205.0/1/3/4 up to model year 2019 with code 237 (Active Blind Spot Assist) |
AR88.20-P-2200LW | ||
| 2 | Disconnect electrical connector (2) from radar sensors (B92/6, B92/7, B92/10 or B92/11). | ||
| 3.1 | Remove mounting bracket (3) and remove radar sensors (B92/6, B92/7, B92/10 or B92/11). | Model 205.0/1/2 up to model year 2019 with code 234 (Blind Spot Monitoring) Model 205.0/1/2 up to model year 2019 with code 237 (Active Blind Spot Assist) | |
| 3.2 | Release and remove radar sensors (B92/6, B92/7, B92/10 or B92/11) from rear bumper (1). | Model 205.3/4 up to model year 2019 with code 234 (Blind Spot Monitoring) Model 205.3/4 up to model year 2019 with code 237 (Active Blind Spot Assist) |
|
| 4 | Install in the reverse order. |