LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2018 >> C350e >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Electrical System, Equipment & Instruments - 205 Chassis - 3 Of 5 >> Testing & Repair >> Remove/Install Additional Battery Relay - AR54.15-P-2000LW

Remove/Install Additional Battery Relay - AR54.15-P-2000LW

Model 205.012/013/047/053/054/147/212/213/247/253 

Model 253.311/353/354/911/953/954 

Fig 1: Additional Battery Relay Components Location - Model 205.047
G12938393Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Remove floor covering in front passenger footwell.   AR68.20-P-2070LW
2 Detach ground line of on-board electrical system battery.   AR54.10-P-0003LW
3 Remove nuts (1) and remove footrest (2).    
4 Detach strips of felt tape (4). NOTESInstallation  :
Check that the felt tape strips (4) are seated securely.
Otherwise, a short circuit may occur.
 
5 Disconnect electrical connector (3).    
6 Remove nut (5) and remove positive line. TORQUE SPECIFICATION Nut, positive line to relay for additional battery *BA54.10-P-1007-01A 
7 Remove nut (6) and remove positive line. TORQUE SPECIFICATION Nut, positive line to relay for additional battery *BA54.10-P-1007-01A 
8 Remove nuts (7).    
9 Remove ECO start/stop function auxiliary battery relay (K114).    
10 Install in the reverse order.    
BATTERY

Number Designation Model 205 Model 253
BA54.10-P-1007-01A Nut, positive line to relay for additional battery Nm 8 8