Remove/install door sill molding - AR68.30-P-4100NKB

MODEL 117, 156, 176, 242, 246 

Fig 1: Identifying Door Sill Molding Remove/Install Components (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Door Sill Molding Remove/Install Components (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Unclip front door sill (1) with long wedge (3)	Ensure that seal (2) is seated correctly.
		Long wedge	Fig 3
2	Pivot front door sill (1) upward at rear end and remove
3	Unclip rear door sill (1.1) with long wedge (3)	Long wedge	Fig 3
4	Remove rear door sill (1.1)	Pivot rear door sill (1.1) upward at front end and move guide (4) out of paneling (5).
5	Install in the reverse order

Fig 3: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA