LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2017 >> SLC43 AMG >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels, Chassis Alignment Check - 172 Chassis - 1 Of 2 >> Testing & Repair >> Adjust Camber And Caster At The Front Axle - AR40.20-P-0263CW

Adjust Camber And Caster At The Front Axle - AR40.20-P-0263CW

Model 172, 204, 207 

MODIFICATION NOTES

29.02.2016 Caster values form added. Operation step 5 BE40.20-P-1001-20N
29.02.2016 Basic date for permissible difference in caster between right and left sides of the vehicle, added. Operation step 5 BE40.20-P-1002-20N
29.02.2016 Basic date for absolute caster tolerance, added. Operation step 5 BE40.20-P-1003-20N
03.11.2015 Camber on front axle at vehicle level Operation step 4 BE40.20-P-1001-13AA
03.11.2015 Permissible difference in front axle camber between right and left side of vehicle Operation step 4 BE40.20-P-1002-13AA

Camber Shown on model 204.0 except code M005 (4MATIC) 

G13845792Courtesy of MERCEDES-BENZ USA

Caster Shown on model 204.0 except code M005 (4MATIC) 

G13845793Courtesy of MERCEDES-BENZ USA
INSPECT Check     
1 Carry out initial measurement Model 172, 207 AR40.20-P-0200EW 
    Model 204 AR40.20-P-0200CW
REMOVING Remove     
2.1 Remove both lower engine compartment paneling Model 204.9 AR61.20-P-1105CY
2.2 Remove engine compartment paneling Model 172 with engine 152, 271, 274, 276
 
Model 204.0 with engine 156, 271, 272, 274, 276
 
Model 204.2 with engine 156, 271, 272, 274, 276
 
Model 204.3 with engine 156, 271.8, 274, 276
 
Model 207 with engine 271, 272, 273, 274, 276, 278
 
Model 204.0 with engine 156, 271, 272, 274, 276
 
Model 204.2 with engine 156, 271, 272, 274, 276
 
Model 204.3 with engine 156, 271.8, 274, 276
 
Model 207 with engine 271, 272, 273, 274, 276, 278
AR61.20-P-1105EW
    Model 172 with engine 152, 271, 274, 276 AR61.20-P-1105W
2.3 Remove bottom sections of soundproofing Model 172 with engine 651
 
Model 204.0 with engine 642, 646, 651
 
Model 204.2 with engine 642, 646, 651
 
Model 204.3 with engine 651
 
Model 207 with engine 642, 651
 
    Model 204.0 with engine 642, 646, 651
 
Model 204.2 with engine 642, 646, 651
 
Model 204.3 with engine 651
 
Model 207 with engine 642, 651
AR94.30-P-5300EW
    Model 172 with engine 651 AR94.30-P-5300W
  Adjust     
3 Raise the vehicle at the front axle    
4 Replace threaded connection of cross strut (17) on front axle carrier with repair bolt (19c) with washers (19d) and nuts (19b) For camber correction.
IMPORTANT Pay attention to installation position of repair bolt (19c):
Positive camber change (a).
Negative camber change (b).
IMPORTANT Screw on the nut (19b) of the repair bolt (19c) up to the contact surface, but do not tighten yet.
MODEL 207Camber at vehicle level
*BE40.20-P-1001-13Q 
    MODEL 207Permissible difference in front axle camber between right and left side of vehicle *BE40.20-P-1002-13Q 
    model 204 Camber at vehicle level *BE40.20-P-1001-13O 
    model 204 Permissible difference in front axle camber between right and left side of vehicle *BE40.20-P-1002-13O 
    Model 172 Camber on front axle at vehicle level *BE40.20-P-1001-13AA 
    Model 172 Permissible difference in front axle camber between right and left side of vehicle *BE40.20-P-1002-13AA 
5 Replace threaded connection of strut rod (18) on front axle carrier with repair bolt (19c) with washers (19d) and nuts (19b) For caster correction.
Model 207
AR40.20-P-0322-03EC
    Model 204 (except 204.9) AR40.20-P-0322-03CW
    Model 204.9 AR40.20-P-0322-03CZ
  Model 172
IMPORTANT Pay attention to installation position of repair bolt (19c):
Caster increase (c).
Caster reduction (d).
IMPORTANT Screw on the nut (19b) of the repair bolt (19c) up to the contact surface, but do not tighten yet.
  AR40.20-P-0322-03W 
    Model 204 (except 204.9)
 
Model 204.9
 
Model 207Caster values, form
*BE40.20-P-1001-20E 
    Model 204 (except 204.9) Model 204.9 *BE40.20-P-1002-20E 
    Model 207Permissible difference in caster between right and left side of vehicle  
    Model 204 (except 204.9) Model 204.9 *BE40.20-P-1003-20E 
    Model 207absolute caster tolerance  
    Model 172 Caster values, form *BE40.20-P-1001-20N 
    Model 172 Permissible difference in caster between right and left side of vehicle *BE40.20-P-1002-20N 
    Model 172 absolute caster tolerance *BE40.20-P-1003-20N 
6 Recheck vehicle level at front axle after adjusting the camber and caster Model 204 AR40.20-P-0301CY
    Model 172, 207 AR40.20-P-0301CW 
INSTALLING Install     
7 Tighten nuts (19b) of repair bolts (19c) NOTES
When tightening the nuts (19b), counterhold the repair bolts (19c).
Otherwise, the lock tabs in the front axle
 
    carrier will be damaged.  
    TORQUE SPECIFICATION Model 172 Self-locking nut (repair kit), strut rod to front axle carrier * BA33.20-P-1003-01Q 
    TORQUE SPECIFICATION Model 204 model 207Self-locking nut (repair kit), strut rod to front axle carrier *BA33.20-P-1010-01N 
    TORQUE SPECIFICATION Model 172 Self-locking nut (repair kit), * BA33.20-P-1006-01Q 
    cross strut to front axle carrier  
    TORQUE SPECIFICATION Model 204 model 207Self-locking nut *BA33.20-P-1005-01N 
    (repair kit), cross strut to front axle carrier  
8 Carry out final measurement Model 204 AR40.20-P-0200CW
    Model 172, 207 AR40.20-P-0200EW 
9.1 Install both lower engine compartment paneling Model 204.9 AR61.20-P-1105CY
9.2 Install lower engine compartment paneling Model 172 with engine 152, 271, 274, 276
Model 204.0 with engine 156, 271, 272, 274, 276
Model 204.2 with engine 156, 271, 272, 274, 276
Model 204.3 with engine 156, 271.8, 274, 276
Model 207 with engine 271, 272, 273, 274, 276, 278
Model 204.0 with engine 156, 271, 272, 274, 276
Model 204.2 with engine 156, 271, 272, 274, 276
AR61.20-P-1105EW
    Model 204.3 with engine 156, 271, 274, 276
Model 207 with engine 271, 272, 273, 274, 276, 278
Model 172 with engine 152, 271, 274, 276
AR61.20-P-1105W
9.3 Install bottom section of soundproofing Model 172 with engine 651
Model 204.0 with engine 642, 646, 651
Model 204.2 with engine 642, 646, 651
Model 204.3 with engine 651
Model 207 with engine 642, 651
 
    Model 204.0 with engine 642, 646, 651
Model 204.2 with engine 642, 646, 651
Model 204.3 with engine 651
Model 207 with engine 642, 651
AR94.30-P-5300EW
    Model 172 with engine 651 AR94.30-P-5300W
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 172.403/447/448/457 up to model year 2015 except code 483/486 Model 172.403/447/448/45 7 up to model year 2015 with code 483/486
BE40.20-P-1001-13AA Camber on front axle at vehicle level 1.65° ∠° - -1°28' (+15'-24')
2.46° ∠° - -
3.26° ∠° -1°26' (+15'-24') -
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 172.403/447/448/457 as of model year 2016 except code 483/486
Model 172.404/431/434/438 except code 483/486
Model 172.403/447/448/45 7 as of model year 2016 with code 483/486
Model 172.404/431/434/43 8 with code 483/486
BE40.20-P-1001-13AA Camber on front axle at vehicle level 1.65° ∠° - -1°28' (+15'-24')
2.46° ∠° - -
3.26° ∠° -1°26' (+15'-24') -
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 172.466 AMG Model 172.475 AMG
BE40.20-P-1001-13AA Camber on front axle at vehicle level 1.65° ∠° - -
2.46° ∠° -1°56' (+24') -1°27' (±24')
3.26° ∠° - -
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2 up to model refinement package, with cross strut (old version), with code 482 Model 204.0/2 up to model refinement package, with cross strut (new version), with code 482
BE40.20-P-1001-13O Camber at vehicle level +10.64° ∠° - -0° 6' (+15'/-27')
+10.06° ∠° - -
+9.06° ∠° -0° 6' (+19'/-27') -
+8.47° ∠° - -
+8.26° ∠° - -
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2 up to model refinement package, with cross strut (old version), with code 483/486, except 4MATIC Model 204.0/2 up to model refinement package, with cross strut (new version), with code 483/486, except 4MATIC
BE40.20-P-1001-13O Camber at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - -
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -0° 30' (+15'/-27')
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° -0° 30' (+21'/-27') -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2 up to model refinement package, with cross strut (old version), with code 485/677, except 4MATIC Model 204.0/2 up to model refinement package, with cross strut (new version), with code 485/677, except 4MATIC
BE40.20-P-1001-13O Camber at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - -0° 20' (+15'/-27')
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° -0° 20' (+20'/-27') -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2 as of model refinement package, with code 482 Model 204.0/2 as of model refinement package, with code 483/486, except 4MATIC
BE40.20-P-1001-13O Camber at vehicle level +10.64° ∠° -0° 6' (+15'/-27') -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - -
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -0° 30' (+15'/-27')
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2 as of model refinement package, with code 485, except 4MATIC Model 204.0/2 as of model refinement package, with code 677, except 4MATIC
BE40.20-P-1001-13O Camber at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° -0° 20' (+15'/-27') -0° 20' (+15'/-27')
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.3 with code 483/486, except code P84, except 4MATIC Model 204.3 with code 677, except 4MATIC
BE40.20-P-1001-13O Camber at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - -0° 20' (+15'/-27')
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° -0° 30' (+15'/-27') -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.3 with code P84 Model 204.0/2/3 with 4MATIC, with code 486
BE40.20-P-1001-13O Camber at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - -
+8.16° ∠° - -
+6.76 ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° -1° 31' (±21') -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -0° 35' (+15'/-27')
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2/3 with 4MATIC, with code 677 Model 204.9 with code 485, except code 460/494/830
BE40.20-P-1001-13O Camber at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - -
+8.16° ∠° - -0° 16' (±21')
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° -0° 29' (±21') -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.9 as of model refinement package, with code 491, except code 460/494/830 Model 204.9 with code 482
BE40.20-P-1001-13O Camber at vehicle level +10.64° ∠° - -
+10.06° ∠° - -0° 3' (±21')
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - -
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° -0° 33' (±21') -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.9 with code 486 Model 204.9 with code 460/494/830
BE40.20-P-1001-13O Camber at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -0° 14' (±21')
+8.26° ∠° - -
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° -0° 34' (±21') -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2 AMG up to model refinement package Model 204.0/2 AMG as of model refinement package, model 204.3 AMG except codeP98
BE40.20-P-1001-13O Camber at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - -
+8.16° ∠° - -
+6.76° ∠° - -1° 45' (+ 21')
+6.68° ∠° - -
+6.45° ∠° -1° 23' (±21') -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.3 AMG with code P98 except code 224 Model 204.3 AMG with code P98+code 224
BE40.20-P-1001-13O Camber at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - -
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° -1° 57' (±18') -
+4.98° ∠° - -
+4.92° ∠° - -1° 58' (±18')
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 207 with code 483/485/486 except 4Matic Model 207 with 4Matic
BE40.20-P-1001-13Q Camber at vehicle level -2.06° ∠° - -0° 38' (+15'/-27')
-0.34° ∠° - -0° 35' (+15'/-27')
+1.38° ∠° - -0° 31' (+15'/-27')
+4.13° ∠° -0° 35' (+3'/-39') -
+5.72° ∠° -0° 31' (+3'/-39') -
+7.31° ∠° -0° 25' (+3'/-39') -
TEST AND ADJUSTMENT VALUES FOR CASTER

Number Designation Model 204 (except 204.9) Model 204.9
BE40.20-P-1001-20E Caster values, form    
See 0F40.20-P-3000-00 CW  0F40.20-P-3000-0 CZ 
TEST AND ADJUSTMENT VALUES FOR CASTER

Number Designation Model 207
BE40.20-P-1001-20E Caster values, form  
See 0F40.20-P-3000-00 EC 
TEST AND ADJUSTMENT VALUES FOR CASTER

Number Designation Model 172
BE40.20-P-1001-20N Caster values, form  
See 0F40.20-P-3000-00B 
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 172.403/447/448/457 up to model year 2015 except code 483/486 Model 172.403/447/448/45 7 up to model year 2015 with code 483/486
BE40.20-P-1002-13AA Permissible difference in front axle camber between right and left side of vehicle ∠° 24' 24'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 172.403/447/448/457 as of model year 2016 except code 483/486, model 172.404/431/434/438 except code 483/486 Model 172.403/447/448/45 7 as of model year 2016 with code 483/486, model 172.404/431/434/43 8 with code 483/486
BE40.20-P-1002-13AA Permissible difference in front axle camber between right and left side of vehicle ∠° 24' 24'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 172.466 AMG Model 172.475 AMG
BE40.20-P-1002-13AA Permissible difference in front axle camber between right and left side of vehicle ∠° 24' 24'
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2 up to model refinement package, with cross strut (old version), with code 482 Model 204.0/2 up to model refinement package, with cross strut (new version), with code 482
BE40.20-P-1002-13O Permissible difference in front axle camber between right and left side of vehicle ∠° ±24' ±24'
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2 up to model refinement package, with cross strut (old version), with code 483/486, except 4MATIC Model 204.0/2 up to model refinement package, with cross strut (new version), with code 483/486, except 4MATIC
BE40.20-P-1002-13O Permissible difference in front axle camber between right and left side of vehicle ∠° + 24' + 24'
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2 up to model refinement package, with cross strut (old version), with code 485/677, except 4MATIC Model 204.0/2 up to model refinement package, with cross strut (new version), with code 485/677, except 4MATIC
BE40.20-P-1002-13O Permissible difference in front axle camber between right and left side of vehicle ∠° ±24' ±24'
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2 as of model refinement package, with code 482 Model 204.0/2 as of model refinement package, with code 483/486, except 4MATIC
BE40.20-P-1002-13O Permissible difference in front axle camber between right and left side of vehicle ∠° ±24' ±24'
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2 as of model refinement package, with code 485, except 4MATIC Model 204.0/2 as of model refinement package, with code 677, except 4MATIC
BE40.20-P-1002-13O Permissible difference in front axle camber between right and left side of vehicle ∠° ±24' ±24'
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.3 with code 483/486, except code P84, except 4MATIC Model 204.3 with code 677, except 4MATIC
BE40.20-P-1002-13O Permissible difference in front axle camber between right and left side of vehicle ∠° ±24' ±24'
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.3 with code P84 Model 204.0/2/3 with 4MATIC, with code 486
BE40.20-P-1002-13O Permissible difference in front axle camber between right and left side of vehicle ∠° ±24' ±24'
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2/3 with 4MATIC, with code 677 Model 204.9 with code 485, except code 460/494/830
BE40.20-P-1002-13O Permissible difference in front axle camber between right and left side of vehicle ∠° ±24' ±24'
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.9 as of model refinement package, with code 491, except code 460/494/830 Model 204.9 with code 482
BE40.20-P-1002-13O Permissible difference in front axle camber between right and left side of vehicle ∠° ±24' ±24'
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.9 with code 486 Model 204.9 with code 460/494/830
BE40.20-P-1002-13O Permissible difference in front axle camber between right and left side of vehicle ∠° + 24' + 24'
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.0/2 AMG up to model refinement package Model 204.0/2 AMG as of model refinement package, model 204.3 AMG except codeP98
BE40.20-P-1002-13O Permissible difference in front axle camber between right and left side of vehicle ∠° ±24' ±24'
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 204.3 AMG with code P98 except code 224 Model 204.3 AMG with code P98+code 224
BE40.20-P-1002-13O Permissible difference in front axle camber between right and left side of vehicle ∠° ±24' ±24'
CHECK VALUES FOR FRONT AXLE CAMBER

Number Designation Model 207 with code 483/485/486 except 4Matic Model 207 with 4Matic
BE40.20-P-1002-13Q Permissible difference in front axle camber between right and left side of vehicle ∠° ±24' ±24'
TEST AND ADJUSTMENT VALUES FOR CASTER

Number Designation Model 204 (except 204.9) Model 204.9
BE40.20-P-1002-20E Permissible difference in caster between right and left side of vehicle ∠° ±30' ±30'
TEST AND ADJUSTMENT VALUES FOR CASTER

Number Designation Model 207
BE40.20-P-1002-20E Permissible difference in caster between right and left side of vehicle ∠° ±30'
TEST AND ADJUSTMENT VALUES FOR CASTER

Number Designation Model 172
BE40.20-P-1002-20N Permissible difference in caster between right and left side of vehicle ∠° ±30'
TEST AND ADJUSTMENT VALUES FOR CASTER

Number Designation Model 204 (except 204.9) Model 204.9
BE40.20-P-1003-20E absolute caster tolerance ∠° ±30' ±30'
TEST AND ADJUSTMENT VALUES FOR CASTER

Number Designation Model 207
BE40.20-P-1003-20E absolute caster tolerance ∠° ±30'
TEST AND ADJUSTMENT VALUES FOR CASTER

Number Designation Model 172
BE40.20-P-1003-20N absolute caster tolerance ∠° ±30'
WHEEL CONTROL, HUB

Number Designation Model 172
BA33.20-P-1003-01Q Self-locking nut (repair kit), strut rod to front axle carrier Stage 1 M14X120X11.9 Nm 100
Stage 2 ∠° 180
WHEEL CONTROL, HUB

Number Designation MODEL 204 except 4MATIC MODEL 204 with 4MATIC
BA33.20-P-1005-01N Self-locking nut (repair kit), cross strut to front axle carrier M14X115X 10.9 Stage 1 Nm 80  
Stage 2 ∠° 120 -
M14X120X 11.9 Stage 1 Nm 100 100
Stage 2 ∠° 180 180
WHEEL CONTROL, HUB

Number Designation MODEL 207 except 4MATIC MODEL 207 with 4MATIC
BA33.20-P-1005-01N Self-locking nut (repair kit), cross strut to front axle carrier M14X115X 10.9 Stage 1 Nm 80 -
Stage 2 ∠° 120 -
M14X120X 11.9 Stage 1 Nm 100 100
Stage 2 ∠° 180 180
WHEEL CONTROL, HUB

Number Designation Model 172
BA33.20-P-1006-01Q Self-locking nut (repair kit), cross strut to front axle carrier Stage 1 M14X120X11.9 Nm 100
Stage 2 ∠° 180
WHEEL CONTROL, HUB

Number Designation MODEL 204 except 4MATIC MODEL 204 with 4MATIC
BA33.20-P-1010-01N Self-locking nut (repair kit), strut rod to front axle carrier M14X115X 10.9 Stage 1 Nm 80  
Stage 2 ∠° 120 -
M14X120X11.9 Stage 1 Nm 100 100
Stage 2 ∠° 180 180
WHEEL CONTROL, HUB

Number Designation MODEL 207 except 4MATIC MODEL 207 with 4MATIC
BA33.20-P-1010-01N Self-locking nut (repair kit), strut rod to front axle carrier M14X115X 10.9 Stage 1 Nm 80 -
Stage 2 ∠° 120 -
M14X120X 11.9 Stage 1 Nm 100 100
Stage 2 ∠° 180 180