Notes On Seat Occupied Recognition - AH91.60-P-0760-01P
Model 171 as of 6/1/06, 172, 203.0/2 as of 6/1/04, 203.7 as of 4/1/04, 209 as of 6/1/04, 230 as of 3/1/06, 240 as of 9/1/06
with code 494 (US version)
Passenger seat
Shown on front passenger seat, model 203
Shown on front passenger seat, model 230
When removing the seat cushion, the connectors on pressure sensor (B48/4) (model 171, 203, 209, 230) or on seat occupied recognition pressure sensor (B48/4) (model 172, 240) and on WSS (Weight Sensing System) control unit (N2/13) (model 203, 209) or on Weight Sensing System (WSS) control unit (N110) (model 171, 172, 230, 240) must not be disconnected.
Disconnecting the connectors causes malfunctions of the supplemental restraint system (SRS) at the passenger side.
The new seat cushion is always supplied complete with pressure sensor (B48/4) (model 171, 203, 209, 230) or seat occupied recognition pressure sensor (B48/4) (model 172, 240) and WSS (Weight Sensing System) control unit (N2/13) (model 203, 209) or Weight Sensing System (WSS) control unit (N110) (model 171, 172, 230, 240) and is calibrated beforehand.