LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2017 >> SLC43 AMG >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Brakes - Hydraulic & Mechanical System - 205 Chassis 1 Of 2) >> Testing & Repair >> Installing Protective Washers To Protect Brake Disk Dust Shields - AR42.00-P-0100-01A

Installing Protective Washers To Protect Brake Disk Dust Shields - AR42.00-P-0100-01A

WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

Model 129, 140, 166, 167, 170, 171, 172, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 220, 221, 222, 230, 231, 238, 253, 292, 293 

Fig 1: Identifying Guard Plate (220 589 01 31 00)
G13841853Courtesy of MERCEDES-BENZ USA
G07069174Courtesy of MERCEDES-BENZ USA

NOTESSPECIAL TOOL Guard plates (060) are not a substitute for complete wheels. The vehicle must not be lowered onto the mounted SPECIAL TOOL guard plates (060). When the engine is running, do not engage a gear or gear range.

Otherwise the SPECIAL TOOL guard plates (060) may be damaged.

  1. SPECIAL TOOL Attach guard plate (060) to the wheel hub using 3 wheel bolts.

IMPORTANT Wheel bolts for light alloy wheels are too long and may therefore not be used. Use only short wheel bolts.