Remove/install electric parking brake switch - AR42.20-P-0505RK

MODEL 231 

Fig 1: Electric Parking Brake Switch Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition and remove transmitter key (A8/1) or KEYLESS-GO start/stop button (S2/3) from electronic ignition lock control unit (N73)	KEYLESS-GO start/stop button (S2/3) only with code (889) Keyless-Go.
2	Remove cover below dashboard		AR68.10-P-1500RK
3	Disconnect electrical connection (2) from parking brake electrical switch (S76/15)
4	Unclip retaining clips (1) and remove electric parking brake switch (S7615) from instrument panel
5	Install in the reverse order