Table of contents for function description of motor electronics (ME-SFI) fuel injection and ignition system - GF07.61-P-0999MUB
ENGINE 277, 279 in MODEL 222
ENGINE 279 in MODEL 217
| Motor electronics (ME-SFI) fuel injection and ignition system, function | GF07.61-P-0001MUB | ||
| Ignition ON, function | GF07.10-P-1000MUB | ||
| Starting, function | GF07.10-P-1001MUB | ||
| Ignition OFF, function | GF07.10-P-1002MUB | ||
| Fuel supply, function | GF07.10-P-1003MUB | ||
| Injection regulation, function | GF07.10-P-1004MUB | ||
| Ignition system function | GF07.10-P-1005MUB | ||
| Synchronize fuel injection and firing order function | GF07.10-P-1006MUB | ||
| Start, post-start phase and warm-up enrichment, function | GF07.10-P-1007MUB | ||
| Rpm control, function | GF07.10-P-1008MUB | ||
| Alternator interface function | GF07.10-P-1009MUB | ||
| Lambda control, function | GF07.10-P-1010MUB | ||
| Smooth running control, function | GF07.10-P-1011MUB | ||
| Thermal management, function | GF07.10-P-1012MUB | ||
| Torque coordination, function | GF07.10-P-1013MUB | ||
| Deceleration fuel shutoff, function | GF07.10-P-1014MUB | ||
| Knock control, function | GF07.10-P-1015MUB | ||
| Engine limp-home mode, function | GF07.10-P-1019MUB | ||
| On-board diagnosis, function | GF07.10-P-1020MUB | ||
| Charging, function | GF09.00-P-2000MUB | ||
| Exhaust treatment function | GF14.00-P-3000MUB | ||
| Electronic accelerator function | GF30.20-P-3015MUB | ||
| On-board refueling vapor recovery function | ENGINE 277, 279 in MODEL 222 with CODE 494 (US version) ENGINE 279 in MODEL 217 with CODE 494 (US version) | GF47.10-P-3004MUB | |
| Purging function | GF47.30-P-3015MUB | ||
| Purging system with leak test function | ENGINE 277, 279 in MODEL 222 with CODE 494 (US version) ENGINE 279 in MODEL 217 with CODE 494 (US version) | GF47.30-P-3016MUB | |
| Overview of system components motor electronics (ME-SFI) fuel injection and ignition system | GF07.61-P-9997MUB |