Remove/install oil lines of oil cooling for automatic transmission - AR27.55-P-0600LFB
TRANSMISSION 725.0 in MODEL 217, 222 with ENGINE 278
TRANSMISSION 725.0 in MODEL 222 with ENGINE 276
Shown on model 217 with engine 276
Fig 1: Automatic Transmission Oil Cooling Lines Remove/Install Components - Shown On Model 217 With Engine 276
Shown on model 222 with engine 278
Fig 2: Automatic Transmission Oil Cooling Lines Remove/Install Components - Shown On Model 222 With Engine 278
| Notes on automatic transmission | AH27.19-P-0001-01NKB | ||
| Remove/install | |||
| 1 | Open engine hood | ||
| 2 | Remove engine cover | ||
| 3 | Remove right engine air intake duct upstream of left air filter | ||
| 4 | Secure vehicle on vehicle lift | AR00.60-P-0100CW | |
| 5 | Detach oil lines (1) from oil cooler | AR27.10-P-0501-03LF | |
| Figure | |||
| 6 | Remove underfloor paneling | AR61.20-P-1105LF | |
| 7 | Detach oil lines (1) from transmission | AR27.10-P-0501-03LF | |
| Figure | |||
| 8 | Fix steering wheel in center position with holding device | Fig 3 | |
| 9 | Detach steering coupling from rack-and-pinion steering | Model 217 with engine 278 with transmission 725.0 Model 222 as of 4/30/14 with engine 276 with transmission 725.0 Model 222 as of 4/30/14 with engine 278 with transmission 725.0 |
AR46.10-P-8000-01LW |
| Fig 4 | |||
| 10 | Lower rack-and-pinion steering | AR46.20-P-0600LF | |
| 11 | Remove screws/bolts (2, 3) and bracket | ||
| 12 | Twist oil lines (1) and remove in downward direction | Do not kink or bend the oil lines (1). Otherwise leaks may occur. |
|
| 13 | Install in the reverse order | ||
| Check | |||
| 14 | Check oil level in transmission; correct if necessary | Transmission 725.0 in model 217, 222 with engine 278 as of model year 2015 Transmission 725.0 in model 222 with engine 276 as of model year 2015 |
AR27.00-P-0270EWN |
| Transmission 725.0 in model 217, 222 with engine 278 up to model year 2015 Transmission 725.0 in model 222 with engine 276 up to model year 2015 |
AR27.00-P-0270EWM | ||
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 15 | Perform engine test run and check transmission for proper function and leaktightness. |