Remove/install low temperature water circuit radiator - AR09.41-P-6935MUB
MODEL 217 with ENGINE 279
MODEL 222 with ENGINE 277, 279
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Notes on coolant | AH20.00-N-2080-01A | ||
| Remove/install | |||
| 1 | Drain coolant from low-temperature circuit | AR09.41-P-6834MUB | |
| 2 | Remove engine radiator (6) | AR20.20-P-3865MUB | |
| 3 | Detach lower coolant hose on low-temperature cooler (5) | ||
| 4 | Detach upper coolant hose on low-temperature cooler (5) | ||
| 5 | Remove low-temperature cooler (5) upwards from the cooling module supporting frame (7) | ||
| 6 | Install in the reverse order | ||
| Check | |||
| 7 | Check low-temperature circuit for leaktightness | AR09.41-P-1010MUB | |
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 8 | Perform an engine test run and check engine cooling system for low-temperature circuit for proper operation |