Remove/install rear roller sun blind motor for panoramic roof - AR77.21-P-0492LF
MODEL 222
with CODE 398 (Panoramic roof with MAGIC SKY CONTROL)
MODEL 222
with CODE 413 (Automatic panoramic sliding sunroof)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove headliner and lay down on vehicle interior | Model 222.0/1 with code 398 (Panoramic roof with MAGIC SKY CONTROL) Model 222.0/1 with code 413 (Automatic panoramic sliding sunroof) |
AR68.30-P-4300LF |
| 2 | Release and disconnect electrical connection (1) | ||
| 3 | Unscrew bolts (2) and remove rear panoramic sliding roof roller sun blind drive cable (M12/6) | ||
| 4 | Install in the reverse order | ||
| 5 | Close diagnostic system, normalize panoramic roof and perform teach-in run for automatic reversing function of the panoramic roof | ||
| AD00.00-P-2000-04B |