Remove/install outer mirror ambient lamp - AR82.10-P-0001LW
MODEL 205, 253
with CODE P49 (Mirror package)
MODEL 213, 217, 222
| Remove/install | |||
| 1 | Remove glass adjustment drive | AR88.70-P-9060LF | |
| 2 | Remove 360° camera from outside mirror | Model 205.0/1/2, 253.9 up to model year 2016 with code 501 (360° camera) with code P49 (Mirror package) |
AR54.30-P-3002LW |
| Model 205.0/1/2, 253.9 as of model year 2016 with code 501 (360° camera) with code P49 (Mirror package) Model 205.3/4, 253.3 with code 501 (360° camera) with code P49 (Mirror package) Model 213 with code 501 (360° camera) |
AR54.65-P-3002LW | ||
| Model 217, 222 with code 501 (360° camera) |
AR54.30-P-3002LF | ||
| 3 | Disconnect electrical connection (1) | ||
| 4 | Release left outside mirror ambient lamp (M21/1e1) or right outside mirror ambient lamp (M21/2e1) at catch hook (2) (arrow A) | ||
| 5 | Release catch hook (3) from housing (4) | ||
| 6 | Extend left outside mirror ambient lamp (M21/1e1) or right outside mirror ambient lamp (M21/2e1) (arrow B), push housing (4) downwards slightly while doing so (arrow C) | Carefully push housing (4) downwards, and not too far. Otherwise, the housing (4) may be damaged. |
|
| 7 | Install in the reverse order |