Remove/install antenna amplifier module - AR82.62-P-8300LF
MODEL 217.3
MODEL 222
Shown on MODEL 222 with CODE 413 (Panoramic sliding roof)
Fig 1: Antenna Amplifier Module Remove/Install Components - Shown On Model 222 With Code 413 (1 Of 2)
Fig 2: Antenna Amplifier Module Remove/Install Components - Shown On Model 222 With Code 413 (2 Of 2)
| Remove/install | |||
| 1.1 | Remove headliner service flap (7) | MODEL 222.0/1/9 with CODE 413 (Automatic panoramic sliding sunroof) |
|
| 1.2 | Remove headliner | MODEL 222.0/1/9 without CODE 413 (Automatic panoramic sliding sunroof) |
|
| 2 | Disconnect electrical connections (2) from FM 1, AM, CL [ZV] and KEYLESS-GO antenna amplifier (A2/18) | Avoid tensile load on electrical lines to rear window. Otherwise, the contact bars may be damaged. |
|
| 3 | Loosen screw/bolt (1) at FM 1, AM, CL and KEYLESS-GO antenna amplifier (A2/18), unclip FM 1, AM, CL and KEYLESS-GO antenna amplifier (A2/18) and remove | ||
| 4 | Disconnect electrical connections (6) from TV 2 and DAB band III antenna amplifier (A94/2) | MODEL 217.3 with CODE 537 (Digital radio (DAB)) MODEL 217.3 with CODE 865 (TV tuner) MODEL 222 with CODE 537 (Digital radio (DAB)) MODEL 222 with CODE 865 (TV tuner) Avoid tensile load on electrical lines to rear window. Otherwise, the contact bars may be damaged. |
|
| 5 | Loosen screw/bolt (5) from TV 2 and DAB Band III antenna amplifier (A94/2), unclip TV 2 and DAB Band III antenna amplifier (A94/2) and remove | MODEL 217.3 with CODE 537 (Digital radio (DAB)) MODEL 217.3 with CODE 865 (TV tuner) MODEL 222 with CODE 537 (Digital radio (DAB)) MODEL 222 with CODE 865 (TV tuner) |
|
| 6 | Remove trim at left from C-pillar | MODEL 217.3 | AR68.30-P-4490LC |
| MODEL 222.0/1 | AR68.30-P-4490LF | ||
| MODEL 222.9 | AR68.30-P-4490LFA | ||
| 7 | Disconnect electrical connections (2) from FM 2 and DAB antenna amplifier (A2/19) | Avoid strain relief on electrical lines. Otherwise, the contact bars may be damaged. |
|
| 8 | Loosen screw/bolt (1) from FM 2 and DAB antenna amplifier (A2/19), unclip FM 2 and DAB antenna amplifier (A2/19) and remove | ||
| 9 | Remove right cover from C-pillar | MODEL 222.0/1 with CODE 865 (TV tuner) |
AR68.30-P-4490LF |
| MODEL 222.9 | AR68.30-P-4490LFA | ||
| MODEL 217.3 with CODE 865 (TV tuner) |
AR68.30-P-4490LC | ||
| 10 | Disconnect electrical connections (4) from TV 1 antenna amplifier (A94/1) | MODEL 217.3 with CODE 537 (Digital radio (DAB)) MODEL 217.3 with CODE 865 (TV tuner) MODEL 222 with CODE 537 (Digital radio (DAB)) MODEL 222 with CODE 865 (TV tuner) Avoid strain relief on electrical lines. Otherwise, the contact bars may be damaged. |
|
| 11 | Loosen screw/bolt (3) from TV 1 antenna amplifier (A94/1), unclip TV 1 antenna amplifier (A94/1) and remove | MODEL 217.3 with CODE 865 (TV tuner) MODEL 222 with CODE 865 (TV tuner) |
|
| 12.1 | Remove left cover from A-pillar | MODEL 222.0/1/9 with CODE 865 (TV tuner) |
AR68.30-P-4050LF |
| 12.2 | Remove right-hand paneling from A-pillar | MODEL 217.3 with CODE 865 (TV tuner) |
AR68.30-P-4490LC |
| 13 | Disconnect electrical connections from TV 3 antenna amplifier (A94/3) | MODEL 217.3 with CODE 865 (TV tuner) MODEL 222 with CODE 865 (TV tuner) Avoid tensile load on electrical lines to rear window. Otherwise, the contact bars may be damaged. |
|
| 14 | Loosen screw/bolt (3) from TV 3 antenna amplifier (A94/3), unclip TV 3 antenna amplifier (A94/3) and remove | MODEL 217.3 with CODE 865 (TV tuner) MODEL 222 with CODE 865 (TV tuner) |
|
| 15 | Install in the reverse order | ||
| 16 | Perform function test |