Remove/Install And Secure Rear Axle Shaft Twelve-Point Collar Nut - AR35.30-P-0115-01RQ
Model 190, 197
MODIFICATION NOTES
| 17.11.2016 | Collar nut, rear axle shaft to rear axle shaft flange | Model 190 | BA35.30-P-1001-01E |
REAR AXLE SHAFT
| Number | Designation | Model 190 | Model 197 | |||
|---|---|---|---|---|---|---|
| BA35.30-P-1001-01E | Collar nut, rear axle shaft to rear axle shaft flange | self-locking | Nm | - | - | |
| not self-locking | Stage 1 | Nm | 200 | 480 | ||
| Stage 2 | ∠° | 30 | - | |||
Detach
- Apply parking brake.
- Unscrew twelve-point collar nut (12).
Mount and secure
Twelve-point collar nut (12) must always be replaced when it is unscrewed.
- Tighten twelve-point collar nut (12).
- Secure twelve-point collar nut (12) using caulker so that there is no gap between the groove and the locking collar on the twelve-point collar nut.
- Release parking brake.