LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2017 >> GT AMG >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Brakes - Hydraulic & Mechanical System -- 205 Chassis (2 Of 2)) >> Maintenance >> Assess Condition Of Brake Linings - AP42.10-P-4252CAA

Assess Condition Of Brake Linings - AP42.10-P-4252CAA

WARNING: This page is about a different car, the 2023 Mercedes-Benz C63 S AMG, 2021 Mercedes-Benz C63 S AMG, 2021 Mercedes-Benz C63 AMG, 2020 Mercedes-Benz C63 S AMG, and 2020 Mercedes-Benz C63 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 205 

G15001733Courtesy of MERCEDES-BENZ USA

Shown on model 221 

G15001734Courtesy of MERCEDES-BENZ USA
WARNING Risk of injury.  Skin or eye injuries may result when handling hot or glowing objects. Wear protective gloves, protective clothing and safety glasses, if necessary. AS00.00-Z-0002-01A
Notice Notes on repairs to brake system   AH42.00-P-0003-01A
INSPECT Check     
1 Assess brake pad thickness (1) of brake pads on front axle. IMPORTANT If necessary, use a flashlight (2) or a mirror (3). The thickness of the pad backing plate can be used as a reference when assessing the brake lining thickness (1).  
    HAND-HELD TESTER Front axle Brake lining thickness
If, in exceptional cases, assessment through a visual inspection is not possible.
↓
Remove front wheels and assess them.
IMPORTANT After obtaining special order.		 *BE42.10-P-1001-05V 
2 Assess brake pad thickness (1) of brake pads on rear axle. IMPORTANT If necessary, use a flashlight (2) or a mirror (3). The thickness of the pad backing plate can be used as a reference when assessing the brake lining thickness (1).  
    IMPORTANT Rear axle Brake lining thickness
If, in exceptional cases, assessment through a visual inspection is not possible.
↓
Remove rear wheels and assess them.
IMPORTANT After obtaining special order.		 *BE42.10-P-1001-15S 
3 Determine expected remaining distance of brake pads.   AP42.10-P-4253-03EW 
    IMPORTANT To determine the prospective remaining distance for each axle, refer to the brake pad with the least brake pad thickness (1).
In order to avoid an unscheduled workshop visit between services, determine the remaining distance of the present brake pads. If the remaining distance determined is less than the next service interval, advise the customer to replaced the brake pads before the due service date.
If the wear limit for the brake pads is reached,
↓
Replace brake linings.
IMPORTANT After obtaining special order.		  
CHECK VALUES FOR FRONT BRAKE LINING

Number Designation Model 205.086/087/286/287/386/387/486/487 Model 205.00/01/03/04/05/06/07/080/083/084/1/20/21/23/24/25/26/27/280/283/284/30/31/34/36/37/380/383/384/40/41/44/46/47/480/483/484 Model 206.003/004/005/041/042/043/141/203/204/205
BE42.10-P-1001-05V Brake lining thickness Brake pad, new mm 10 13
Pad backing plate mm 6 6
Wear limit mm 2 2
Brake wear indicator activated (if installed) mm 2...3 2...3
CHECK VALUES FOR REAR BRAKE PAD

Number Designation Model 205.00/01/03/04/05/06/07/080/083/084/14/17/18/20/21/23/24/25/26/27/280/283/284/30/31/34/36/37/380/383/384/40/41/44/46/47/480/483/484 Model 205.086/087/286/287/386/387/486/487 Model 206.004/005/006/007/016/042/043/046/047/141/142/143/204/205/206/214/216/242/243/245/246/247 except code ME10 (Hybrid vehicle (plug-in, PHEV))
BE42.10-P-1001-15S Brake lining thickness Brake pad, new mm 11, 0 11, 0
Pad backing plate mm 4, 5 6, 0
Wear limit mm 2 2
Brake wear indicator activated (if installed) mm 2...3 2...3
scientia non olet · About LEMON Manuals