Remove/Install Rain/Light Sensor - AR82.30-P-7800LF
WARNING: This page is about a different car, the 2023 Mercedes-Benz C63 S AMG, 2021 Mercedes-Benz C63 S AMG, 2021 Mercedes-Benz C63 AMG, 2020 Mercedes-Benz C63 S AMG, and 2020 Mercedes-Benz C63 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
with code 345 (rain sensor)
Model 213, 217, 222, 238, 253, 293
MODIFICATION NOTES
| 19.06.2020 | Replace rain and light sensor with additional functions (B38/2) if soiled. | Operation step 5. |
Shown on model 222
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 2 | Unclip and remove cover (1). | Fig 2 | |
| 3 | Unclip and remove cover (2). | Fig 2 | |
| 4 | Unhook retaining clamps (4) on both sides of rain and light sensor with additional functions (B38/2). | ||
| 5 | Remove rain and light sensor with additional functions (B38/2) and disconnect electrical connector (3). | Otherwise, soiling may cause the rain/light sensor with additional functions (B38/2) to malfunction. If soiling is present, ↓ replace rain and light sensor with additional functions (B38/2). |
|
| 6 | Install in the reverse order. | ||
| Initial startup | |||
| 7 | Commission rain and light sensor with additional functions (B38/2). | When replacing rain and light sensor with additional functions (B38/2). | |
| Model 293 | AD00.00-P-2000-06FR | ||
| Model 205 with code 345 (rain sensor) |
AD00.00-P-2000-04B | ||
| Model 213, 217, 222, 253 | |||
| Model 238 | AD00.00-P-2000-06LWO |