LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2017 >> GT AMG >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Electrical System -- Body -- 205 Chassis (4 Of 8)) >> Testing & Repair >> Detach/Attach Wiper Arms - AR82.30-P-6100-03LWE

Detach/Attach Wiper Arms - AR82.30-P-6100-03LWE

WARNING: This page is about a different car, the 2023 Mercedes-Benz C63 S AMG, 2021 Mercedes-Benz C63 S AMG, 2021 Mercedes-Benz C63 AMG, 2020 Mercedes-Benz C63 S AMG, and 2020 Mercedes-Benz C63 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 205, 206, 213, 253, 254, 293, 295, 296, 297 

Model 238 

except code 874 (MAGIC VISION CONTROL incl. heated windshield washer system) 

Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.

When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m).

AS82.30-Z-0001-01A 

WINDSHIELD WIPER

Number Designation Model 205 Model 206
BA82.30-P-1001-01M Nut to wiper arm Nm 30 30
WINDSHIELD WIPER

Number Designation Model 213 Model 238
BA82.30-P-1001-01M Nut to wiper arm Nm 30 30
WINDSHIELD WIPER

Number Designation Model 253 Model 293
BA82.30-P-1001-01M Nut to wiper arm Nm 30 30
WINDSHIELD WIPER

Number Designation Model 295 Model 296
BA82.30-P-1001-01S Nut, wiper arm to windshield wiper system M10 Nm 30 30
WINDSHIELD WIPER

Number Designation Model 297
BA82.30-P-1001-01S Nut, wiper arm to windshield wiper system M10 Nm 30
WINDSHIELD WIPER

Number Designation Model 254
BA82.30-P-1001-01U Nut to wiper arm Nm 30
Fig 1: Identifying Puller (001 589 57 33 00)
G15021453Courtesy of MERCEDES-BENZ USA
Fig 2: Identifying Thrust Washer M 10x1.5 (210 589 04 63 00)
G07304530Courtesy of MERCEDES-BENZ USA

Remove 

  1. Remove caps (3, 4).
  2. Remove nuts (5).
  3. Release and remove wiper arms (1, 2) from windshield wiper system using SPECIAL TOOL puller and SPECIAL TOOL thrust piece.

    Install 

  4. Attach wiper arms (1, 2) to the windshield wiper system driver.

    IMPORTANT Position wiper arms (1, 2) with the aid of the window markings.

  5. Install nuts (5).

    Model 205, 206, 213, 253, 293

    Model 238

    except code 874 (MAGIC VISION CONTROL incl. heated windshield washer system) TORQUE SPECIFICATION

    Model 254 TORQUE SPECIFICATION

    Model 295, 296, 297TORQUE SPECIFICATION

    G12824529Courtesy of MERCEDES-BENZ USA
  6. Attach caps (3, 4).

Shown on model 205