000 588 14 80 00 Above-Floor Alignment Lift, 4.0 T - WS00.00-P-0072B

WARNING: This page is about a different car, the 2023 Mercedes-Benz C63 S AMG, 2021 Mercedes-Benz C63 S AMG, 2021 Mercedes-Benz C63 AMG, 2020 Mercedes-Benz C63 S AMG, and 2020 Mercedes-Benz C63 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model all (4xWD, CAR, smart)

MODIFICATION NOTES

23.05.2017

All references to accessory parts removed.

Use in FG 00/Set B

Purpose:

Surface-mounted alignment lift with two parallel tracks including integrated sliding plates and recesses for turntables.

Test equipment category CAT_A.

Procurement information:

Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).

Courtesy of MERCEDES-BENZ USA

NOTE: Please note the vehicle-specific accessories. Limited use possible for Vitoria vans.

Manufacturer 1:

MAHA Maschinenbau Haldenwang GmbH & Co. KG

Hoyen 20

87490 Haldenwang

Germany

http://www.maha.de

Type/model: CARLIFT II 4.0 MB Article no.: VP 251188

Manufacturer 2

Ravaglioli SPA

Sasso Marconi fraz. Pontecchio

40037 Bologna

Italy

http://www.ravaglioli.com

Type/model: Ravaglioli SPA - RAV4406MB Article no.: RAV4406MB

Type/model: RAVAGLIOLI SPA - RAV8045.2.48MB Article number: RAV8045.2.48MB
Type/model: Butler SPA - Logic406MB Article no.: Logic406MB
Type/model: Butler SPA - CISORY45.48AMB Article number: CISORY45.48AMB
Type/model: Space Srl - SQ406MB Article no.: SQ406MB
Type/model: Space Srl - SF8045.2.48MB Article number: SF8045.2.48MB
Type/model: BlitzRotary GmbH - V45AK48MB Article no.: V45AK48MB