LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2017 >> GT AMG >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Air Intake, Turbocharging -- 190 Chassis >> Testing & Repair >> Tightening Procedure For Charge Air Distributor - AR09.41-P-8683-01MNA

Tightening Procedure For Charge Air Distributor - AR09.41-P-8683-01MNA

Engine 176 in model 463 

up to model year 2019 

Engine 177 in model 205 

Engine 178 in model 190 

MODIFICATION NOTES

11.09.2015 Screw/bolt, charge air distributor to cylinder head   BA09.41-P-1004-01X
06.02.2023 Screw/bolt, charge air distributor to cylinder head Engine 177.8 in model 290, Engine 177.9 in models 167, 205, 213, 217, 222, 253, 290, Engine 177.9 in model 463 BA09.41-P-1004-01X
CHARGE AIR LINE/CHARGE AIR COOLING

Number Designation Engine 176 Engine 177.8 in model 290
Engine 177.9 in model 167, 205, 213, 217, 222, 253, 290
Engine 177.9 in model 463
BA09.41-P-1004-01X Screw/bolt, charge air distributor to cylinder head Nm 13 13
CHARGE AIR LINE/CHARGE AIR COOLING

Number Designation Engine 178
BA09.41-P-1004-01X Screw/bolt, charge air distributor to cylinder head Nm 13

Shown on charge air distributor of Engine 178 in model 190 

Fig 1: Charge Air Distributor Tightening Sequence - Engine 178 In Model 190
G13656460Courtesy of MERCEDES-BENZ USA
  1. Tighten screw/bolts (A to E) of the left and right charge air distributor (1, 2) in the alphabetic sequence TORQUE SPECIFICATION .

    Shown on charge air distributor of Engine 177 in model 205 

    G12817143Courtesy of MERCEDES-BENZ USA

    Shown on charge air distributor of Engine 176 in model 463 

    G12817143Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals