Center Roof Paneling Installation - Ar65.10-P-1000-07RG

Model 190.3 

with code 397 (Carbon roof) 

Model 190.3 

with code M032 (Black Series version) 

Courtesy of MERCEDES-BENZ USA

Apply adhesive material to carbon roof 

1. Cut triangular opening of application nozzle so that adhesive can be applied with a height of approx. 13 mm and a width of approx. 8 mm.

   Immediately remove contamination caused by the adhesive. Completely remove excess adhesive from cartridges immediately after applying adhesive and dispose of it as per local regulations.

2. Guide application nozzle along bonding surface (area D) on body flange, squeezing out adhesive evenly.