Rear Tightening Torque Specifications - BA64.20-P-1000-01F
Model 190, 197
REAR END
| Number | Designation | Model 190 | Model 197 | ||
|---|---|---|---|---|---|
| BA64.20-P-1001-01F | Bolt, transmission mount to transverse control arm mount | Nm | 37 | 37 | |
| BA64.20-P-1002-01F | Bolt, mounting console to bodyshell/rear transverse control arm mounting at rear | Undamaged thread | Nm | 40 | 40 |
| Repaired thread | Nm | 28 | 28 | ||
| BA64.20-P-1003-01F | Bolt, mount for rear exhaust system crossmember | Nm | 22 | 20 | |
| BA64.20-P-1004-01F | Bolt/nut, rear bumper crossmember to mounting console/crash box | Nm | 15 | 15 | |
| BA64.20-P-1005-01F | Nut, crash box mounting console to rear crossmember mount | Nm | 40 | 40 | |
| BA64.20-P-1006-01F | Bolt/nut, rear diagonal strut to transverse control arm mount | Nm | - | 20 | |
| BA64.20-P-1007-01F | Bolt/nut, rear reinforcement to longitudinal member mounting console | Nm | 20 | 23 | |
| BA64.20-P-1008-01F | Bolt, rear reinforcement to crossmember below exhaust system | Nm | - | 8 | |
| BA64.20-P-1009-01F | Bolt/nut, lower reinforcement mount to thrust arm, exhaust system | Nm | 20 | - | |
| BA64.20-P-1010-01F | Bolt, lower crossmember to longitudinal member | Nm | 22 | - | |
| BA64.20-P-1011-01F | Bolt, upper reinforcement to rear floor | Nm | 22 | - | |
| BA64.20-P-1012-01F | Bolt, lower reinforcement to crossmember | Nm | 22 | - | |
| BA64.20-P-1013-01F | Screw/bolt, strut to B-pillar trim bracket | Nm | 8 | - | |
| BA64.20-P-1014-01F | Screw, tailgate, bracing to rear-end floor | Nm | 8 | - | |