000 588 00 23 00 Adjusting Gauge - WS82.00-P-0028B
Model All
Use in FG 54/67/82/98/Set B
Purpose:
Calibration target for adjusting the camera of driver assistance systems.
Testing equipment category CAT_A.
Technical note:
Application in combination with a headlamp aimer or other suitable tripod.
Procurement information:
This workshop equipment is not distributed through the regular replacement part ordering process in
GLC/LC, but directly from the manufacturer/supplier. Recommended workshop equipment and information on the manufacturers/suppliers can be found in the WS document (see below).
Manufacturer
ROMESS Rogg Apparate + Electronic GmbH & Co. KG
Dickenhardtstr. 67
78054 VS- Schwenningen
Germany
http://www.romess.de
Type/model: Calibration target for Night View Assist
Article no.: 09840-10
Accessories: Adaptation for Hella headlamp aimer (45° rotated bracket).
Article no.: 09840-11