Secure Vehicle On Vehicle Lift - AR00.60-P-0100GZ
MODEL 164, 166, 292
Shown: Model 164.8
Shown on model 166.057
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Mount/detach | |||
| 1 | Remove covers from vehicle lift support points | ||
| 2 | Remove both front or rear mounting brackets (5) | MODEL 166 with CODE 846 (Running boards) | |
| 3 | Insert lifting platform safety devices (1) into longitudinal members | The vehicle lift safety devices (1) must always be mounted in pairs (i.e. at two positions) at the longitudinal members on the vehicle. The vehicle lift safety devices (1) can be mounted together at the front or together at the rear; they may not be mounted on one side of the vehicle or diagonally on it. |
Fig 2 |
| Fig 1 | |||
| 4 | Swivel lever (2) of vehicle lift safety devices (1) to the right until lever (2) is secured | ||
| 5 | Turn support plates (4) on vehicle lift support arm (3) until it makes contact with the vehicle lift safety devices (1) or the vehicle lift support point of the longitudinal member | ||
| 6 | Raise vehicle with vehicle lift | AR00.60-P-1000GZ | |
| 7 | Secure vehicle lift safety devices (1) to the vehicle lift support arm (3) using tensioning straps | ||
| 8 | Dismantle in reverse order |