Common Rail Diesel Injection (CDI) - BA07.16-P-1000-01C
ENGINE 628.960/961/962/963, 629, 642
COMMON RAIL DIESEL INJECTION SYSTEM (CDI)
| Number | Designation | ENGINE 628.960/962/963 | ENGINE 628.961 | ||
|---|---|---|---|---|---|
| BA07.16-P-1001-01C | Nut, pressure line to valve block/high-pressure pump | Nm | 23 | 23 | |
| BA07.16-P-1002-01C | Rail pressure sensor to valve block | Nm | 35 | 30 | |
| BA07.16-P-1003-01C | Bolt, rail to cylinder head | Nm | 20 | 20 | |
| BA07.16-P-1004-01C | Bolt, pressure regulating valve to valve block | Stage 1 | Nm | 3 | 3 |
| Stage 2 | Nm | 5 | 5 | ||
| BA07.16-P-1005-01C | Banjo bolt, leak oil line to valve block | Nm | 20 | 20 | |
| BA07.16-P-1006-01C | Bolt, clamping claw to injector | Stage 1 | Nm | 7 | 7 |
| Stage 2 | ∠° | 90 | 90 | ||
| Stage 3 | ∠° | 90 | 90 | ||
| BA07.16-P-1007-01C | Bolt, high-pressure pump to cylinder head | Nm | 14 | 14 | |
| BA07.16-P-1008-01C | Bolt, prefeed pump to high-pressure pump | Nm | 9 | 9 | |
| BA07.16-P-1009-01C | Nut, pressure line to valve block/rail | Nm | 23 | 23 | |
| BA07.16-P-1010-01C | Union nut, pressure line to rail/injector | Nm | 23 | 23 | |
| BA07.16-P-1011-01C | Pressure pipe connection to injector | Nm | 42 | 42 | |
| BA07.16-P-1012-01C | Bolt, retaining clamp of high-pressure line to cylinder head cover | Nm | - | 8 | |
| BA07.16-P-1013-01C | Rail pressure sensor to rail | Nm | 30 | 30 | |
| BA07.16-P-1014-01C | Valve block to charge air manifold | Nm | 12 | 12 | |
| BA07.16-P-1015-01C | Bolt, retaining clamp of high-pressure line to charge air manifold | Nm | 8 | 8 | |
| BA07.16-P-1016-01C | Union nut, fuel feed line and fuel return line to line | Nm | - | 24 | |
| BA07.16-P-1017-01C | Bolt, fuel cooler to cylinder crankcase | Nm | - | 9 | |
| BA07.16-P-1018-01C | Bolt, quantity control valve to high-pressure pump housing flange | Nm | 7 | 7 | |
| BA07.16-P-1019-01C | High-pressure fitting to high-pressure pump | Nm | 55 | 55 | |
| BA07.16-P-1020-01C | Nut to high-pressure pump drive gear | M14 x 1.5 | Nm | - | - |
| BA07.16-P-1021-01C | Bolt, high-pressure pump to cylinder head | Nm | - | - | |
| BA07.16-P-1022-01C | Fuel line to cylinder head cover/lifting eye/charge air manifold | M6 x 12 | Nm | - | - |
| M6 x 15 | Nm | - | - | ||
| M6 x 19 | Nm | - | - | ||
| BA07.16-P-1023-01C | Leak oil line to charge air distribution line | M6 x 23 | Nm | - | - |
| BA07.16-P-1024-01C | Fuel line between left and right tail | M15 | Nm | - | - |
| BA07.16-P-1025-01C | Pressure line to high-pressure pump | M14 | Nm | - | - |
| BA07.16-P-1026-01C | Pressure line to high-pressure pump to rail | M15 | Nm | - | - |
| BA07.16-P-1027-01C | Drive gear to high-pressure pump | M14 x 1.5 | Nm | - | - |
| BA07.16-P-1028-01C | Union nut, pressure line to rail | M15 | Nm | - | - |
| BA07.16-P-1029-01C | Union nut, pressure line to injector | M14 | Nm | - | - |
| BA07.16-P-1030-01C | Banjo bolt, fuel line (return) to high-pressure pump | M14 | Nm | - | - |
COMMON RAIL DIESEL INJECTION SYSTEM (CDI)
| Number | Designation | ENGINE 629 | ENGINE 642 | ||
|---|---|---|---|---|---|
| BA07.16-P-1001-01C | Nut, pressure line to valve block/high-pressure pump | Nm | - | - | |
| BA07.16-P-1002-01C | Rail pressure sensor to valve block | Nm | - | - | |
| BA07.16-P-1003-01C | Bolt, rail to cylinder head | Nm | 14 | 14 | |
| BA07.16-P-1004-01C | Bolt, pressure regulating valve to valve block | Stage 1 | Nm | - | - |
| Stage 2 | Nm | - | - | ||
| BA07.16-P-1005-01C | Banjo bolt, leak oil line to valve block | Nm | - | - | |
| BA07.16-P-1006-01C | Bolt, clamping claw to injector | Stage 1 | Nm | 7 | 7 |
| Stage 2 | ∠° | 90 | 90 | ||
| Stage 3 | ∠° | 90 | 90 | ||
| BA07.16-P-1007-01C | Bolt, high-pressure pump to cylinder head | Nm | 20 | - | |
| BA07.16-P-1008-01C | Bolt, prefeed pump to high-pressure pump | Nm | - | - | |
| BA07.16-P-1009-01C | Nut, pressure line to valve block/rail | Nm | - | - | |
| BA07.16-P-1010-01C | Union nut, pressure line to rail/injector | Nm | - | - | |
| BA07.16-P-1011-01C | Pressure pipe connection to injector | Nm | - | - | |
| BA07.16-P-1012-01C | Bolt, retaining clamp of high-pressure line to cylinder head cover | Nm | - | - | |
| BA07.16-P-1013-01C | Rail pressure sensor to rail | Nm | 85 | 70 | |
| BA07.16-P-1014-01C | Valve block to charge air manifold | Nm | - | - | |
| BA07.16-P-1015-01C | Bolt, retaining clamp of high-pressure line to charge air manifold | Nm | - | - | |
| BA07.16-P-1016-01C | Union nut, fuel feed line and fuel return line to line | Nm | 25 | - | |
| BA07.16-P-1017-01C | Bolt, fuel cooler to cylinder crankcase | Nm | - | - | |
| BA07.16-P-1018-01C | Bolt, quantity control valve to high-pressure pump housing flange | Nm | 7 | 7 | |
| BA07.16-P-1019-01C | High-pressure fitting to high-pressure pump | Nm | 55 | 55 | |
| BA07.16-P-1020-01C | Nut to high-pressure pump drive gear | M14 x 1.5 | Nm | 70 | 70 |
| BA07.16-P-1021-01C | Bolt, high-pressure pump to cylinder head | Nm | 20 | 15 | |
| BA07.16-P-1022-01C | Fuel line to cylinder head cover/lifting eye/charge air manifold | M6 x 12 | Nm | 9 | 9 |
| M6 x 15 | Nm | - | 14 | ||
| M6 x 19 | Nm | 11 | - | ||
| BA07.16-P-1023-01C | Leak oil line to charge air distribution line | M6 x 23 | Nm | - | 12 |
| BA07.16-P-1024-01C | Fuel line between left and right tail | M15 | Nm | 27 | 27 |
| BA07.16-P-1025-01C | Pressure line to high-pressure pump | M14 | Nm | 33 | 33 |
| BA07.16-P-1026-01C | Pressure line to high-pressure pump to rail | M15 | Nm | 27 | 27 |
| BA07.16-P-1027-01C | Drive gear to high-pressure pump | M14 x 1.5 | Nm | 70 | 70 |
| BA07.16-P-1028-01C | Union nut, pressure line to rail | M15 | Nm | 27 | 27 |
| BA07.16-P-1029-01C | Union nut, pressure line to injector | M14 | Nm | 33 | 33 |
| BA07.16-P-1030-01C | Banjo bolt, fuel line (return) to high-pressure pump | M14 | Nm | 25 | - |