Install Additional Fan For COMAND Online Incl. DVD Changer - AN82.85-P-0008-01GQ
Model 166.0/8
with code 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT)
except code 810 (Premium sound system)
except code 811 (High-End sound system)
The following operation steps describe installation in a left-hand drive vehicle. The work procedure may differ for right-hand drive vehicles.
- Engage COMAND fan motor (M4/13) in air duct (1) and tighten with screw/bolt (3).
- Connect white 4-pin connector (4) with white 4-pin plug (5).
This creates the electrical connector for the radio fan (X120).
- Mount filter (6) onto COMAND fan motor (M4/13) and latch into place in counterclockwise direction.