Update Map Data Status For COMAND Navigation System - AP82.85-P-8252A
Model 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251
Model 463 up to model year 2019
| Prepare update | |||
| 1 | Check whether a map data update is available to the customer free of charge | * Map update ↓ |
|
| Service Information: Free map updates for COMAND Model 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251 Up to 3 years as of initial registration date. Model 463 up to model year 2019 with code EX6 (6 years' free map data updates) Model 463 up to model year 2019 with code EX9 (3 years' free map updates) |
SI82.85-P-0019A | ||
| 2 | Activation code for map data update available in Vehicle Documentation (VeDoc) | * not for USA ↓ * not for USA ↓ |
|
| Service information: Copy protection in navigation unit with hard-disk navigation COMAND with copy protection | SI82.85-P-0018A | ||
| 3 | Check state of charge (SOC) of the high-voltage battery | Model 212.095/098/195/298 * not for USA ↓ |
|
| Service Information: Programming of control units | SI54.21-P-0008B | ||
| 4 | Open hood | Model 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251 Model 463 up to model year 2019 |
|
| Model 204.3, 207, 212 Moving the engine hood to the vertical position: Detach left and right clamping levers at the upper left and right hinges. |
AR88.40-P-1000EW | ||
| Risk of fire /risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC. | No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers. |
AS54.10-Z-0001-01A | |
| 5 | Connect battery charger | ||
| Notes on battery | AH54.10-P-0001-01A | ||
| 6 | Switch ignition lock to position "1" (circuit 15R) | ||
| 7 | Switch on COMAND controller unit | ||
| 8 | Remove CDs or DVDs from the COMAND disc drive | When updating using the master DVD | |
| 9 | Connect the Blu-ray player of the diagnostic system to the front USB connection ports of the COMAND control unit | When updating using the master Blu-ray disc The option to update using Blu-ray is not available in every market. If no Blu-ray option is available: ↓ Carry out update using the master DVD or USB stick. |
|
| Update | |||
| 10.1 | Insert the master DVD and update map data | Model 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251 Model 463 up to model year 2019 When updating using the master DVD The update process can take a while to complete. The progress bar indicates how much has been completed. If there are multiple master DVDs, follow the instructions on the COMAND display. |
|
| 10.2 | Insert master Blu-ray disc into external Blu-ray player of XENTRY kit and update map data | Model 205, 222 with code 531 (COMAND APS) When updating using the master Blu-ray disc (for NTG 5.0) The update version can subsequently be called up via "Navi", "Options" and "Map version". |
|
| 10.3 | Start the menu from the master USB stick and update the map data | Model 117, 156, 166, 172, 176, 204, 205, 207, 212, 218, 222, 231, 242, 246 Model 463 up to model year 2019 When updating using the master USB stick (from NTG 4.5 onwards) The progress bar indicates how much has been completed. |
|
| 11.1 | Remove all master DVDs from the vehicle and insert the previously removed CDs or DVDs | Model 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251 Model 463 up to model year 2019 After updating using the master DVD |
|
| 11.2 | Remove the master Blu-ray disc from the Blu-ray player and disconnect the front USB connectors | Model 205, 222 After updating using the master Blu-ray disc (for NTG 5.0) |
|
| 11.3 | Remove USB stick from the front USB connections | Model 117, 156, 166, 172, 176, 204, 205, 207, 212, 218, 222, 231, 242, 246 Model 463 up to model year 2019 After updating using the master USB stick (from NTG 4.5 onwards) |
|
| 12 | Switch off COMAND control unit | ||
| 13 | Switch off ignition | ||
| Risk of fire /risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC. | No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers. |
AS54.10-Z-0001-01A | |
| 14 | Disconnect battery charger | ||
| Notes on battery | AH54.10-P-0001-01A | ||
| 15 | Close engine hood | Model 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251 Model 463 up to model year 2019 |
|
| Model 204.3, 207, 212 Close engine hood: Mount left and right clamping levers at the upper left and right hinges. |
AR88.40-P-1000EW |