Remove/Install Rear Axle Headlamp Range Adjustment Sensor - AR82.10-P-4084GQ
Model 166 as of model year 2016
with code 610 (Night view assist)
Model 166 as of model year 2016
with code 641 (Dynamic LED headlamps, left-hand traffic)
Model 166 as of model year 2016
with code 642 (Dynamic LED headlamps, right-hand traffic)
Model 166 with code 615 (Bi-xenon headlamps with active light function)
Model 166 with code 621 (Bi-xenon adapt. headl., left-s. traffic)
Model 166 with code 622 (Intelligent Light System)
Model 292
Fig 1: Rear Axle Headlamp Range Adjustment Sensor Components Location - Model 166 As Of Model Year 2016 With Code 610, 641, 642, 615, 621, 622
Shown on model 166
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Lift vehicle on vehicle lift | AR00.60-P-1000GZ | |
| 2 | Unclip lever (2) | ||
| 3 | Remove bolts (3) | *BA82.10-P-1001-02C | |
| 4 | Remove left rear level sensor (B22/7) or right rear level sensor (B22/10) from retaining plate | ||
| 5 | Disconnect electrical connector from left rear level sensor (B22/7) or right rear level sensor (B22/10) | ||
| 6 | Install in the reverse order | ||
| Initial startup | |||
| 7 | Connect diagnostic system, read out fault memory and adjust zero position of headlamps | ||
| AD00.00-P-2000-04A | |||
| 8 | Check headlamp setting and correct if necessary | ||
| Model 166 up to model year 2016 with code 615 (Bi-xenon headlamps with active light function) Model 166 up to model year 2016 with code 621 (Bi-xenon adapt. headl., left-s. traffic) Model 166 up to model year 2016 with code 622 (Intelligent Light System) |
AP82.10-P-8260GZA | ||
| Model 166 as of model year 2016 with code 610 (Night view assist) Model 166 as of model year 2016 with code 615 (Bi-xenon headlamps with active light function) Model 166 as of model year 2016 with code 621 (Bi-xenon adapt. headl., left-s. traffic) Model 166 as of model year 2016 with code 622 (Intelligent Light System) Model 166 as of model year 2016 with code 641 (Dynamic LED headlamps, left-hand traffic) Model 166 as of model year 2016 with code 642 (Dynamic LED headlamps, right-hand traffic) Model 292 |
AP82.10-P-8260I |
REAR AXLE LEVEL SENSOR
| Number | Designation | Model 166 | Model 292 | |
|---|---|---|---|---|
| BA82.10-P-1001-02C | Bolt, level sensor to retaining plate | Nm | 5 | 5 |