Roll Control - Check Fluid Level - AP32.34-P-3210A

MODEL 166 

with CODE 468 (ACTIVE CURVE SYSTEM) 

Courtesy of MERCEDES-BENZ USA

	Notes on active roll stabilization		AH32.34-P-0001-01A
	Check
1	Open engine hood
			AR88.40-P-1000GQ
2	Clean cap (1) and surrounding area
3	Check and correct fill level in expansion reservoir (2)	The fill level must be at the MAX marking (appropriate for the temperature) of the oil dipstick (1a). In the event of fluid loss: ↓ determine the cause and rectify (subject to a separate invoice).
4	Seal expansion reservoir (2)
5	Close engine hood
			AR88.40-P-1000GQ