Initial Startup Of Retrofits And Modifications - AN00.01-P-1001-01CW

MODEL 166, 204, 212, 218.9 (except 218.974) 

1. Confirm the initial screen by pressing "F2".
2. Observe and confirm displayed safety information.
3. Select applicable category and confirm with "F3".
4. Select applicable model series and confirm with "F3".
5. In the main group selection, select the menu item:

   "Entry for retrofit and modifications" and confirm with "F3".

6. Enter retrofitted SA codes (equipment codes +), if necessary delete SA codes that are no longer applicable (equipment codes -).

   Additional instructions in the Diagnosis Assistance System are to be noted and performed.