Remove/Install Contact Plate For Cell Phone Holder (UPCI (UHI)) In The Armrest - AR82.70-P-8919GQ

Model 166, 292 

with code 386 (Comfort telephony) 

Model 166, 292 

with code 518 (Media interface) 

Shown on model 166 

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Fold up armrest at center console
2	Remove mat (2)
3	Remove bolts (3)
4	Pull cover (4) upward out of stowage box	Ensure electrical lines are routed correctly.
5	Disconnect electrical lines (6)	The number of electrical lines (6) varies depending on the vehicle equipment.
6	Remove bolts (5)
7	Take off Bluetooth module (7) from cover (4) and remove
8	Install in the reverse order