Cut Out Cover With Cutting Wire - AR82.70-P-8952-02EW

Model 117.3 

Model 166, 172.4, 218 

Model 212.0/2 

as of model year 2011 

Model 222 

Model 242, 246 

with code 362 (HERMES communications module LTE) 

with code 460 (Canada version) 

Model 242, 246 

with code 362 (HERMES communications module LTE) 

with code 494 (US version) 

Model 242, 246 

with code 536 (Sirius satellite radio complete system) 

Model 292 

Risk of injury caused by tearing of the cutting wire

Wear safety glasses.

AS88.00-Z-0001-01A

The cover (1) is destroyed when cut out and it has to be replaced.

1. Cut cutting wire (2) to a length of approx. 50 cm and attach pull handles (3) at both ends.
2. Place cutting wire (2) on left around adhesive bead of cover (1) and cut adhesive material.

   Move cutting wire (2) upwards against the cover (1).

   Otherwise the paint will be damaged.

   Courtesy of MERCEDES-BENZ USA

3. Place cutting wire (2) on right around adhesive bead of cover (1) and cut adhesive material.

   Move cutting wire (2) upwards against the cover (1).

   Otherwise the paint will be damaged.

4. Remove cover (1).

   The cover (1) can be removed by hand once the adhesive bead has been cut completely.

Courtesy of MERCEDES-BENZ USA