Collision - Rear Wall & Rear End - 166 Chassis

• General Information
  • General Notes: Passenger Cars: Rear Wall And Rear End - Ah64.00-Z-9999AZ
• Testing & Repair
  • Separate Outer Rear Center Section - Ar64.20-P-1000-01GQ
  • Prepare Outer Rear Center Section - Ar64.20-P-1000-09GQ
  • Install And Weld In Outer Part Of Rear Center Section - Ar64.20-P-1000-10GQ
  • Replace Complete Bottom Rear Center Section - Ar64.20-P-1000GQ
  • Remove Rear CROSSMEMBER - Ar64.20-P-1100-01GQ
  • Prepare Rear CROSSMEMBER For Installation - Ar64.20-P-1100-02GQ
  • Install Rear CROSSMEMBER - Ar64.20-P-1100-05GQ
  • Remove Longitudinal Member At Rear - Ar64.20-P-1200-22GQX
  • Prepare Rear Longitudinal Member For Installation - Ar64.20-P-1200-23GQX
  • Install Rear Longitudinal Member - Ar64.20-P-1200-24GQX
  • Repair Rear End On Left Side - Ar64.20-P-1200GQ
  • Completely Remove/Install Rear Longitudinal Member - Ar64.20-P-1220GQX
  • Remove Spare Tire Well - Ar64.20-P-1245-01GQ
  • Prepare Spare Tire Well - Ar64.20-P-1245-02GQ
  • Install Spare Tire Well - Ar64.20-P-1245-03GQ
  • Replace Spare Tire Well - Ar64.20-P-1245GQ
  • Partially Remove Rear Longitudinal Member - Ar64.20-P-1260-01GQ
  • Prepare Rear Longitudinal Member Section - Ar64.20-P-1260-02GQ
  • Install Rear Longitudinal Member Section - Ar64.20-P-1260-03GQ
• Torque Specifications
  • Tightening Torques: Passenger Cars: Rear Wall And Rear End - BA64.00-Z-9999AZ
  • Rear - BA64.20-P-1000-01G
• Special Tools
  • 201 589 00 27 00 Cross-Brace - WS64.00-P-0012K
  • 1251 589 00 27 00 Puller - WS64.00-P-0114K