Remove/Install Electric Parking Brake Actuator Motor - AR42.20-P-0600W
Model 166, 172, 292
Fig 1: Left/Right Electric Parking Brake Actuator Motor Components Location - Model 166 (Shown Model 172.457)
Shown model 172.457
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Notice | Notes on repairs to brake system | AH42.00-P-0003-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Remove/install | |||
| 1 | Switch off ignition and keep transmitter key at a location beyond transmitter range (at least 2 m) | ||
| 2 | Detach corresponding complete wheel | ||
| Model 166 | AP40.10-P-4050EW | ||
| Model 172 | AP40.10-P-4050V | ||
| Model 292 | AR40.10-P-1100GQC | ||
| 3 | Unhook electrical line (3) on retaining frame (1) | Model 172 | |
| 4 | Unclip retaining frame (1) from left electric parking brake actuator motor (M76/1) or right electric parking brake actuator motor (M76/2) | Model 172 | |
| 5 | Disconnect electrical connector (4) on left electric parking brake actuator motor (M76/1) or right electric parking brake actuator motor (M76/2) | ||
| 6 | Unscrew bolts (2) | *BA42.10-P-1006-12L | |
| *BA42.10-P-1005-12J | |||
| 7 | Remove left electric parking brake actuator motor (M76/1) or right electric parking brake actuator motor (M76/2) | ||
| 8 | Install in the reverse order | ||
| 9 | Carry out brake test on the test stand | ||
| AP42.00-P-4290BA |
REAR AXLE BRAKE CALIPER
| Number | Designation | Model 172 | |
|---|---|---|---|
| BA42.10-P-1005-12J | Bolt, actuator motor to brake caliper | Nm | 12 |
REAR AXLE BRAKE CALIPER
| Number | Designation | Model 166 | Model 292 | |
|---|---|---|---|---|
| BA42.10-P-1006-12L | Screw/bolt, actuator motor for parking brake to brake caliper | Nm | 12 | 12 |