Remove/Install Panoramic Sliding Roof Motor - AR77.21-P-6995GQ

MODEL 166 with CODE 413 (Automatic panoramic sliding sunroof) 

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Loosen headliner in front area up to B-pillars	MODEL 166 with CODE 413 (Automatic panoramic sliding sunroof) with CODE Z05 (B5 armoring on special protection version)	AR68.30-P-4300GQS
		MODEL 166 with CODE 413 (Automatic panoramic sliding sunroof) without CODE Z05 (B5 armoring on special protection version)	AR68.30-P-4300GQ
2	Lower headliner and disconnect electrical connector (4) on panoramic sliding sunroof control module (A98)	Carefully lower headliner. Headliner can be damaged.
3	Lower headliner and unscrew bolts (3)	Carefully lower headliner. Headliner can be damaged. : First position bolts (3) and then tighten.
4	Remove panoramic sliding roof control module (A98)
5	Install in the reverse order
6	Perform teach-in run for anti-trap safeguard and normalization of panoramic sliding roof
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A