Retrofit Bluetooth (R) Antenna For COMAND Online Incl. DVD Changer - AN82.85-P-0008-06GQ
Model 166.0/8
with code 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT)
The following operation steps describe installation in a left-hand drive vehicle. With right-hand drive vehicles these operation steps must be carried out mirror-inverted.
- Clip Bluetooth® antenna (A2/91) into holes on crossmember.
- Route electrical line (1) for Bluetooth® antenna (A2/91), as shown, to the mounting slot for the audio component and fix in place using cable ties.
- Install 1-pin connector (2) into free slot of white dual-coupling housing.
The white dual-coupling housing is connected when installing the COMAND controller unit.