Retrofit WLAN Antenna For COMAND Online Incl. DVD Changer - AN82.85-P-0008-05GQ

Model 166.0/8 

with code 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT) 

The following operation steps describe installation in a left-hand drive vehicle. With right-hand drive vehicles these operation steps must be carried out mirror-inverted.

1. Clip WLAN antenna (A2/83) into holes (3) on cross member (4).

   The WLAN antenna (A2/83) can only be installed in one position.

2. Route electrical line (2) along cross member (4) to slot of COMAND controller unit and fix in place using cable ties.

   The beige 1-pin connector (1) is connected when installing the COMAND controller unit.

Courtesy of MERCEDES-BENZ USA