Prepare Front Fixed Element Of Panoramic Sliding Sunroof For Installation - AR77.21-P-0803-02GQ
Model 166 with code 413 (Panoramic sliding sunroof/glass roof)
| Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A |
- Attach the cup suction tool to the outside of the front fixed element (1) and place the front fixed element (1) down on a suitable surface with the inside facing upward.
- Apply the cleaner with one part of the cleaning cloth to the bonding surfaces on the inside of the front fixed element (1) and wipe with the other part of the cleaning cloth.
The cleaner and the cleaning cloth are included in the repair kit.
Allow cleaner to dry completely.
- Apply the primer evenly and with full coverage to the entire inside of the front fixed element (1).
Observe processing notes for primer.
Otherwise, the adhesive material may not adhere properly during installation.
Allow the primer to dry completely.
- Insert the wind deflector (2) into the terminal strip (5) of the front fixed element (1).