Remove/Install Side Air Vent - AR68.10-P-1100GQ

MODEL 166, 292 

Shown on side air vent on MODEL 166 

Fig 1: Side Air Vent Components Location - Model 166

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Position extraction hooks (01) at side air vent (1)	Extraction hooks (01) should be located in the front mounts (circle).
		Extraction hook	Fig 2
2	Pull side air vent (1) out of instrument panel	Ensure that side air vent (1) arrests correctly.
3	Unclip electrical connector and disconnect	MODEL 292
4	Install in the reverse order

Fig 2: Identifying Extraction Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA