Remove/Install Glove Compartment - AR68.10-P-1400GQ

Model 166 

Model 292 

Shown on model 166 

Fig 1: Glove Compartment Components Location - Model 166

Courtesy of MERCEDES-BENZ USA

Shown on MODEL 166 without CODE 814 (DVD changer) 

Fig 2: Glove Compartment Components Location - Model 166 Without Code 814

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove right cover below instrument panel		AR68.10-P-1520GQ
2	Remove hose (3) from AC housing (4)	Ensure that hose (3) is routed correctly.
3	Remove side paneling (2) from instrument panel	Long wedge	Fig 3
4	Remove screws (5)
5	Open glove compartment (1)
6	Move CD changer to lock position	Model 166 with code 814 (DVD changer) Model 292 with code 814 (DVD changer)
7	Unscrew bolt (6) at side
8	Unscrew bolts (7) in glove compartment (1)
9	Carefully pull out glove compartment (1) and lower until electrical connectors are accessible
10	Disconnect electrical connectors in glove compartment (1)
11	Unclip electrical line with suitable tool
12	Remove glove compartment (1)
13	Install in the reverse order
14	Check DVD changer for proper function	Model 166 with code 814 (DVD changer) Model 292 with code 814 (DVD changer)

Fig 3: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA