Brake And Traction System, Basic Function - GF42.47-P-1000A
MODEL ALL (CAR)
Overview
This document contains information on:
- General
- Function requirements
- Detecting driving situation
General
The brake and traction system assists the driver in suddenly occurring dangerous situations and thus ensures active safety. It includes various subsystems that have a checking, optimizing or regulating function.
Function requirements
- Drive train operational
- Engine running
- Brake and traction system functional
Detecting driving situation
To detect suddenly occurring dangerous situations, the brake and traction system captures the current driving situation. For this purpose, the following signals are captured:
- Left front axle wheel speed
- Right front axle wheel speed
- Left rear axle wheel speed
- Right rear axle wheel speed
- Steering angle
- Stop lamp switch
- Brake pressure
| Additional basic functions | |||
|---|---|---|---|
| Vehicle stabilization, basic function | GF42.47-P-1001A | ||
| Braking results improvement, basic function | GF42.47-P-1003A | ||
| Vehicle holding, basic function | GF42.47-P-1008A | ||
| Adaptive Brake Lights flashing, basic function | GF42.47-P-1012A | ||
| Dynamometer test mode, basic function | GF42.47-P-1013A | ||
| Control units | |||
| Electronic Stability Program control unit, basic function | GF42.45-P-9890A | ||
| Components | |||
| Brake light switch, basic function | GF42.10-P-2001A | ||
| Wheel speed sensors, basic function | GF42.30-P-2007A |