Remove/Install Panoramic Roof Front Glass Roof Rubber Bellows - AR77.21-P-0530EW

MODEL 166, 204.3, 207.3, 212.0/1/2 with CODE 413 (Automatic panoramic sliding sunroof) 

Shown on model 212.0 on left side of vehicle 

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Remove/install
1	Open roller sun blind, move front panoramic sliding roof (1) to tilt position
2	Detach bottom rubber (2) in front area (arrow A) from the mount (4) on the panoramic roof rail and remove in the direction of the arrow (arrow B)
3	Unclip upper rubber element (3) from front panoramic sliding roof (1) and remove
4	Install in the reverse order