Remove/Install Shield At Transmission - AR27.40-P-0700-01GZ

TRANSMISSION 722.9 in MODEL 164, 166.0, 251 

TRANSMISSION 722.9, 725.0 in MODEL 292 

TRANSMISSION 724.2 in MODEL 166 

TRANSMISSION 725.0 in MODEL 166 

Shown on TRANSMISSION 722.9 

1. Remove bolt (1) and remove heat shield (2) downward.
2. Press cable bracket (4) out of heat shield (2) and remove heat shield (2).

   The leaf spring (3) must be modified if a new transmission is installed.

   The heat shield (2) must be located below the leaf spring (3).

3. Install in the reverse order.