Remove/Install Fan Unit - AR20.40-P-5050GQ
ENGINE 276, 642 in MODEL 292
ENGINE 276, 642, 651 in MODEL 166
Shown on model 166 with engine 276.9
Shown on model 166
| Remove/install | |||
| 1 | Remove upper engine cover | ||
| 2 | Remove the engine air intake ducts (2) upstream of the air filter housing | Engine 276.8 in model 166, 292 | AR09.10-P-1150GQC |
| Engine 642 in model 166, 292 | AR09.10-P-1150OGR | ||
| Engine 651 in model 166 | AR09.10-P-1150CD | ||
| 3 | Disconnect electrical connection (5) on fan unit (4) and unclip electrical line on fan unit (4) | ||
| 4 | Unlock and detach vent line on coolant expansion reservoir and on cooler | Engine 642 in model 292 Engine 642, 651 in model 166 | |
| 5 | Unclip vent line from fan unit (4) and from bracket for glow output stage and lay outside the working area | Engine 642 in model 292 Engine 642, 651 in model 166 | |
| 6 | Press unlocking lugs on cooler aside and remove fan unit (4) upwards | ||
| 7 | Install in the reverse order |