000 588 07 82 00 Filling Unit - WS14.00-P-0014B

MODEL ALL (4xWD) with CODE MC7 (Engine OM 642 D 30 BlueTEC) 

MODEL ALL (CAR) with CODE U42 (BlueTEC diesel exhaust treatment (SCR)) 

MODEL ALL (CAR) with CODE U77 (Diesel Emission control BLUETEC (SCR)) 

MODEL ALL (CAR) with CODE U79 (BLUETEC (SCR) diesel exhaust treatment, generation 3) 

Use in FG 14/49 Set A/B 

Purpose: 

AdBlue® filling system for drop free charging of SCR storage tank.

Procurement information: 

This workshop equipment is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier are available below.

Manufacturer 1 

AUTOTESTGERATE Leitenberger GmbH

• Model: AdBlue® filling system

  Article number: ABE 02_MB

• Accessories: extension 30 mm

  Article number: ET 652_30

• Accessories: extension 80 mm

  Article number: ET 652_80

Manufacturer 2 

lumatic Hermann Lummen GmbH

• Calibration capable: 

  Device for countries with a duty to calibrate

  • Type/model: AUS32MobilDB

    Article number: AUS32MobilDB

  • Type/model: AUS32IBCWand

    Article number: AUS32IBCWand

• Not calibration capable: 
  • Type/model: AUS32MobilDB

    Article number: AUS32MobilDB/NE

• Cannot be calibrated USA version: 
  • Type/model: AUS32MobilDB

    Article number: AUS32MobilDB/US

Manufacturer 3 

Flaco Gerate GmbH

• Calibration capable: 

  Device for countries with a duty to calibrate

  • Type/model: FLACOblue200MID

    Article no.: 40603462

• Not calibration capable: 
  • Type/model: FLACOblue200

    Article no.: 40603461

Manufacturer 4 

GL GmbH Metall-und Werkstatt

• Not calibration capable: 
  • Type/model: ABBG 210

    Article no.: ABBG 210